Ciro Mazzoni LOOP ANTENNA MIDI, Instruction Manual, Page: 19 / 41

74
FIRST TURN ON
At the first turn on, the ATU is in “manual mode” and you can digit the frequency
directly from the keyboard.
Now you can try to test the proper functioning of the
LOOP ANTENNA
:
 place the
BABY LOOP
between 1.5m (4.92ft) and 2.5m (8.20ft) above the
ground or reflective surface
 place the
MIDI LOOP
between 2.5m (8.20ft) and 4.0m (13.12ft) above the
ground or reflective surface
 place the
LOOP ANTENNA
leaving at least 2 metres (6.56ft) all around
 connect coaxial and motor cables to the antenna
 ATTENTION: lay both the cables without spirals
75

connect the coaxial cable and the motor cable to the ATU

connect the ATU to the radio
 turn on the ATU
 first of all you have to set your
LOOP ANTENNA
type
 press the – key for 3 seconds
 the display will show SET FULL AUTO?
 press the + key once. The display will show SET ANT. TYPE
 press ENTER

scroll through the options using the button +

select BABY/STEALTH? or MIDI?