----------- TCP2RS -------------- User’s manual -------------------- page 36/43
36
2
If you don’t have a graphical tftp program, you can upload the firmware using
tftp.exe program that comes with any windows 2000 or NT.
tftp –i 192.168.0.25 put circutor.cob WEB1
tftp –i 192.168.0.25 put ltx455.rom 3Q
3
The TCP2RS performs a power reset after the configuration has been changed and
stored
.
D.2.2 Via Another Device Server
To distribute firmware to another Device Server over the network:
1
Enter the host TCP2RS’s Monitor Mode (see Monitor Mode).
2
Send the firmware to the receiving Device Server using the
SF
command, where
x.x.x.x is the receiving Device Server’s IP address.
Figure D-2:
Sending Firmware to Another Device Server
SF x.x.x.x
3
The TCP2RS performs a power reset after the configuration has been changed and
stored
.
Note:
You can only update the
TCP2RS
’s internal Web interface using
TFTP.
D.2.3 Via the Serial Port
To download firmware from a computer via the TCP2RS’s serial port:
