----------- TCP2RS -------------- User’s manual -------------------- page 19/43
19
Incoming Connection
Never
accept
incoming
0 0
0
Accept
incoming
with
DTR 0 1
0
Accept
unconditional
1 1
0
Response
Nothing (quiet)
0
Character response (C=conn,
D=disconn, N=unreachable)
1
Startup
No
active
startup
0
0
0
0
With
any
character
0
0
0
1
With
active
DTR
0
0
1
0
With
CR
(0x0D)
only
0
0
1
1
Manual
connection
0
1
0
0
Autostart
0
1
0
1
Datagram Type
Directed
UDP
1
1
0
0
Modem Mode
With
Echo
1 0 1 1 0
Without Echo
0 0 1 1 0
Note:
See Appendix B for information on converting binary values to
hexadecimal format.
4.5.5.1 Manual Connection
If manual connection startup is configured (
C
+ address/port), only the portion not
provided in the command string is used. In manual mode, the last byte of the address
must be provided.
For example, if the TCP2RS’s configured remote IP address is 129.1.2.3 and the TCP
port number is 1234:
Table 4-5:
Manual Connection Address Example
Command String
Result
C121.2.4.5/1
Complete override; connection is started with host
121.2.4.5, port
1
C5
Connect to 129.1.2.5, port 1234
C28.10/12
Connect to 129.1.28.10, port 12
4.5.5.2 Autostart (Automatic Connection)
