Page
33
C. Appendix: setting the SMS Alarms.
The equipment may be set so that it sends an SMS message when a preset
condition is met.
Follow the steps below to activate and set the alarms:
1.- Connect the RS-232 communications cable to the equipment or set it to
communicate via GSM
2.- Using the PowerVision software, enter the device’s general parameters and then
press “SMS Alarms”
4.- The following message will then appear on the screen to allow the SMS Alarms
parameters to be changed
5.- Up to 8 alarms may be enabled at the same time. Once an alarm is enabled, it
may be set
SMS alarms menu (Steps to be followed):
1. Service Centre Telephone:
Country code for service centre (for example, 34 for Spain)
Contracted company service centre (for example for Vodafone 607003110)
2. Enable Alarm
The different parameters may be set once the alarm is enabled.
3
5
4
6
7
1
10
8
2
9
Summary of Contents for Q20711
Page 14: ...Page 13 5 3 Connection drawing for the QNA P PV...
Page 15: ...Page 14...
Page 16: ...Page 15...
