Page
31
3. With the new card SIM inserted:
15) Remove the RS-232 cable from the analyzer.
16) Wait until the PC software issues a warning (About 60 s)
17) Reconnect the RS-232 communication cable to the QNA analyzer.
18) Check that the PC software notifies the results of the operation. The result may
be:
Successful: The QNA modem is ready to operate.
Error: The SIM card has not been initialized. Check the configuration
again, carefully following all steps.
Upon completion of the installation, ensure that the RS-232 cable is not still
connected to the PC.
This connection will prevent the QNA communicating via the GSM modem
The local modem must not be connected via a telephone
switchboard. It must be a direct line
Summary of Contents for Q20711
Page 14: ...Page 13 5 3 Connection drawing for the QNA P PV...
Page 15: ...Page 14...
Page 16: ...Page 15...
