DIELECTRIC STRENGTH TESTER FOR ISOLATING OILS
OT-60
1. BASIC INSTRUCTIONS
1.1 Delivery spot check
This manual is issued to help all the users to install and use the dielectric strength
tester for isolating oils OT-60, and also to help them to get the best from it. After receiving
the equipment, please check the following points:
(a) The equipment corresponds to your order specification
(b) Check if any damage was done during the shipment process
(c) Verify that you have received all the components specified on 2
nd
point.
1.2 Connection procedures
The manual you hold in your hands contains information and warnings that the user
should respect in order to guarantee a proper operation of all the functions of the OT-60
and keep its safety conditions. Also you must follow the usual security actions.
1.3 Considerations related to the standards
All the comments and advices that you can read on this manual related to the
procedure that you must follow to do dielectric strength tests, are referred to the IEC 156
standard, being only valid if you are following it. If you want to follow another standard, the
comments and advices of this manual can be different (Go to 10
th
point)
2. VERIFICATION OF THE DELIVERIED COMPONENTS
When you receive the equipment, please check that the following components are
included:
2.1 Test Cell:
Open the equipment’s door and pull out the test cell’s white connectors firmly.
Inside the test cell we can find a small bag including the components specified on
the following point.
