3�2�- INSTALLATION
Terminals, opening covers or removing elements can expose parts that are hazardous
to the touch while the device is powered. Do not use the device until it is fully installed.
The device should be installed inside an electric panel or enclosure, and panel-mounted.
To install it, take the following steps:
1�-
Make a cut in the panel, according to the dimensions in
67
67
Figure 1: Cut in the panel�
2�-
Remove the device’s fixing clips (
Clip de fijación / Fixing clip
Figure 2: Fixing clip�
3�-
Insert the device into the cut in the panel.
4�-
Fit the fixing clips until the device is fixed to the panel.
The device should be connected to a power circuit protected by a fuse with a maximum nominal cur-
rent of
0�25 A
.
9
Instruction Manual
DCB-72 mAdc, DCB-72 Adc
Summary of Contents for DCB-72 Adc
Page 1: ...INSTRUCTION MANUAL M208B01 03 21A DC Ammeter DCB 72 mAdc DCB 72 Adc...
Page 2: ...2 DCB 72 mAdc DCB 72 Adc Instruction Manual...
Page 31: ...9 CE CERTIFICATE 31 Instruction Manual DCB 72 mAdc DCB 72 Adc...
Page 32: ...32 DCB 72 mAdc DCB 72 Adc Instruction Manual...
