Circutor CEM-C10, Instruction Manual

Page: 27 / 36

Table 8 (Configuration): Manufacturer information screens�
Screen Parameters
32-bit CRC (high and low-order)
(4)
The screen is displayed if there is a CEM M-RS485 (communications interface for units of the CEM family)
connected to the unit.
4�9�- IMPULSE OUTPUT
The energy meter has optocoupler type outputs capable of generating impulses at a previously pro-
grammed rate. (See
“4.7.1. Impulse output weight ”
and
” 4.7.2. Impulse output type ”
)
4�10�- INFRARED COMMUNICATIONS PORT�
In all versions, the unit has a serial optical communications port, in compliance with the UNE EN
62056-21:2003 Standard.
27
Instruction Manual
CEM-C10