Circutor CBS-400B, Instruction Manual

Page: 26 / 58

26
CBS-400B
Instruction Manual
5�6 �- DIRECT SETTINGS
From the channel's display screens, we can configure the trip current and delay for each of the relays.
To do this, press key for > 3s while it displays the screen of the channel on which to apply the
settings.
Note: In
“ANNEX A.- DIRECT SETTINGS”
we can see the configuration tree.
5�6�1�- PASSWORD
If the configuration password has been activated (see "
6.5.- PASSWORD
"), the following screen is dis-
played to enter the access password.
Use keys and to modify the digit's value.
Press key to skip through the digits.
To validate the value and skip to the first programming point, with a long keystroke press .
5�6�2�- TRIP CURRENT
The relay's trip current is configured in this screen.
Use keys and to skip through the different options: 30 mA , 100 mA , 300 mA , 500 mA , 1�0
A
,
3�0 A�
To skip to the next programming point, press once the key .
Hold down the key for > 3s, to validate the data and exit the programming.