CircuPool RJ PLUS series, Owner'S Manual

Page: 4 / 32

2
.
IMPORTANT SAFETY INSTRUCTIONS. Read and follow
all instructions. Ensure all owners / operators of this
equipment have access to these instructions. Save all
instructions.

WARNING : Follow all aspects of local and National Electrical
Code(s) when installing the CircuPool RJ PLUS Series. Disconnect all
AC power during installation & service.

WARNING : To reduce the risk of injury, do not permit children to
operate this device. Service should only be attempted by a
qualified professional.

WARNING : Heavy pool (and/or spa) usage and higher
temperatures may require higher chlorine output to maintain
proper free available chlorine residuals. The actual amount of
chlorination required by your pool can change, and varies
according to factors not limited to bather load, rain, temperature,
dirt, debris, and chemical balance.

WARNING : Safe operation of the electrolytic cell requires a
minimum water flow rate of 20 gpm. Never operate the unit when
the flow of water is restricted. Always turn unit off when
operating any plumbing control valves such as for backwashing,
water exhaust, or during operation of spa or water features if
operation restricts water flow to the cell. A build-up of flammable
gases will result in hazardous conditions.

WARNING : We strongly recommend against the use of isolation
valves. If full pump pressure is applied to an isolated component,
it may be prone to rupture.

Before installation, ensure that materials and equipment used in
and around the pool are compatible with the use of chlorinated
water and salt. Avoid high chlorine and high salt levels (above the
recommended range); it is possible that certain materials and
pool (and/or spa) equipment may be susceptible to damage.

Ensure that the chlorinator operates only when the circulation
pump is operating. When installed with a pool equipment timer or
control system, the Control Module must be to the load side of
the timer clock or control relay.
SAFETY INSTRUCTIONS