- 7 -
Operation
NOTES:
Read and understand all
warning
and
caution
statements in this
operation manual before using this meter. Set the function select switch to
the OFF position when the meter is not in use.
AC Current Measurements
WARNING:
Ensure that the test leads are disconnected from the meter
before making current clamp measurements.
1. Set the Function switch to the 1000A or
600A range.
2. If the range of the measured is not
known, select the higher range first then
move to the lower range if necessary.
3. Press the trigger to open jaw. Fully
enclose one conductor to be measured.
The clamp meter LCD will display the reading.
DC/AC Voltage Measurements
1. Insert the black test lead into the negative
COM
terminal and the red
test lead into the positive
V
terminal.
2. Set the function switch to position.
3. Select AC or DC with the
MODE
button.
4. Connect the test leads in parallel to the circuit under test.
5. Read the voltage measurement on the LCD display.
