多功能测试仪（
TC-V2.12k
）
Multi-function Tester (TC-V2.12k)
2017-4-62015-8-8
版权所有，侵权必究
All rights reserved
第
16
页
,
共
25
页
Page 16 , Total25
2
Operating Instructions
2.1
Key operational definitions
Multi-function key has two actions:
Short press: Press the key and not less than 10 ms, release key within 1.5 seconds
Long press: Press the key more than 1.5 seconds
2.2
Power on
In the power off state, short press the multifunction key, the tester is turned on and
automatically measured.
Power on & measurement interface
2.3
Detect transistor
In the power off state or the test is completed, put the test element into the transistor test area
of test seat, and press the locking handle, short press the multifunction key, the tester
automatically measure, graphical display of measurement results when testing is complete.
Warning: Always be sure to
DISCHARGE
capacitors before connecting them to the
tester! The tester may be damaged before you have switched it on!
Warning: We do not recommend using the tester to measure the battery! The battery
voltage must be less than 4.5V, otherwise the tester may be damaged!
Component placement
Test seat are divided into transistors and zener diode test area, detailed in 1.1
Description.
No, unknown, or damaged part
