多功能测试仪（
TC-V2.12k
）
Multi-function Tester (TC-V2.12k)
2017-4-62015-8-8
版权所有，侵权必究
All rights reserved
第
23
页
,
共
25
页
Page 23 , Total25
Warning: Adjust the automatic shutdown time required to open the housing, and use
an electric soldering iron solder the jumpers.
Attention
：
Please do ESD protection!
Manual shutdown
Long press the multifunction key to force a shutdown in any state, while the measuring
element is included.
2.8
Built-in Li-ion Battery voltage measurement
The built-in Li-ion Battery voltage is measured before detection, when the battery voltage is
less than 3.0V will force shutdown, then please charging.
2.9
Charging the Battery
The tester has a standard Micro USB interface, please use an external 5V power supply or
USB power charging.
Information
：
Red LED indicates is charging, green LED indicates charging is
complete.
Warning: Charging input voltage up to 6V, do not exceed the top voltage, or it will
damage the tester, and could cause the battery to explode!
