1-1 Product Specifications:
Power Input:
1
10V AC
Power:
320W (MAX)
Air Pump:
diaphragm type
Capability:
23L/min. (MAX)
Temperature:
100 DegC - 480 DegC
1-2 Function:
*Temperature controlled with a digital display.
*Unit heats quickly as soon as the unit it turned on.
*ESD Safe with grounded tips.
*The temperature and air flow can be adjusted over a
wide
range of settings.
*Different size nozzles are available to be able to apply
or help remove solder from a component.
*Cool-down-mode allows for the unit to keep running even
after it is turned off. Allowing for the unit to cool
down so that it extends the life of the rework station.
*Temperature displays users settings and actual temperature
coming from the unit.
1-3 Application:
*Removes most surface mount components such as
SOIC, CHIP, BLCC, BGA, etc...
2-1.
How to read your Display
With the unit turned off and it properly plugged into a 110VAC outlet. The display should have 4
dashes (- - - -). This shows that the unit is in the off position and there is no activity in the reworkstation.
However there is live 110VAC and it does draw a small amount of current in this mode.
Display Character Chart and symble Definitions
a = Stands for Real Time Temperature Measurement
b = Set Temperature
c = Set Airflow
d = Temperature reduction mode drops down by 50%
after sitting in the craddle for 10min.
e = Sleep mode. Temperature will drop and the unit will
begin to cool down.
f = Power Off Mode. When the power switch is turned off
the units air flow will increase and the heating element will shut off allowing the unit too cool
down so that it can shut down safely.
2-2. What you should see when you turn it on.
After removing the set screw in the bottom center of the rework station and having plugged it into a
110VAC outlet and installed the proper heat nozzel to the heat wand your unit is now ready to be turned on.
