Circontrol Wallbox eHome CCL-eHOME Series, User Manual

Page: 9 / 16

07
2.2 Status LED light error’s
1 — V E N T I L AT I O N R E Q U I R E D E R R O R
• In some old EVs,
this state means that there are some gases coming out from the batteries. So,
an external ventilation in the car park might be required. If it were the case, the
status LED light would turn into red and keep blinking permanently.
2 — P I LOT E R R O R
When the Charge Point is connected to the EV, a Pilot short-circuit to earth may
occur. Then, the status LED light bar turns into red and flashes in a sequence of
two blinks.
The Wallbox eHOME is capable to detect the following operating errors:
- Ventilation required error
- Control Pilot
- Proximity error
- Negative PWM error
- Maximum output current MiniDipswitch error
- Temperature error
Whatever the error case is, the Charge Point will stop charging and technical
assistance will be required, except from the temperature error. In this last case,
the Charge Point starts charging when the operating temperature is reached
again.
In the following sections it will be explained how the Wallbox eHOME indicates
the above-mentioned errors and the actions taken by the Charge Point.
1
Blink Sequence
2
Blink Sequence