18
Master/Slave Instruction Manual
G
Charge summary
1- Language button:
pressing over this button it is possible to change the
HMI language.
2- Process instructions:
different instructions can be displayed.
3- Energy charged:
total energy charged at the end of the charging session.
4- Stop reason:
It shows why the charging session has been stopped.
5- Exit button:
It has to be pressed in order to finish the charging session.
After pressing, the HMI screen will go back to the “identification screen”.
6- Recharge time:
total recharging time at the end of the charging session.
7- Information button:
pressing over this button you can get information
about the charging session, per example the “reason for stopping” or
another one.
1
4
5
2
3
6
7
Summary of Contents for Master-Slave
Page 1: ...Instruction Manual Master Slave ...
Page 87: ...85 Monitoring ...
