CIRCLE M6 DC Service Manual Download | Manualshive

Page: 20 / 22

background image

Document: Service Manual

Description: Treadmill

Model: M6 DC

Approved Date: 2017.05.09

Page: 20 of 22

20

7. MAINTENANCE

WARNING!

Always remove the key and unplug the power cord before cleaning, lubricating, or

performing any maintenance.

7.1 General Maintenance

CLEANING

Perspiration should be wiped from the console and treadmill surface after your workout. You should
wipe down this treadmill after each use with a water dampened, soft cloth. Be careful do not get
excessive moisture on the display panel; this might cause an electrical hazard or electronics to fail.

REPLACEMENT RUNNING BELT

Running belt is consumables parts. It should be replaced when the running belt surface showing
signs of wear. Or we suggested you replace running belt after 6000 hours usage.

REPLACEMENT RUNNING DECK

Running deck is consumables parts. It should be replaced when the running deck surface showing
signs of wear. Or we suggested you replace running belt the same schedule as running belt.

STORAGE

Store your treadmill in a clean and dry environment. Ensure the master power switch is off and is
unplugged from the electrical wall outlet.

TRANSPORTATION

This treadmill has been designed and equipped with wheels for easy mobility.
Before the transportation, ensure the main power switch is turned off and the power cord is
unplugged from the electrical outlet.

«
...
18
19
20
21
22
»

Summary of Contents for M6 DC























Reviews:

No comments

Related manuals for M6 DC

Brand: ProForm Pages: 30

Brand: BLADEZ Pages: 7

Brand: Spirit Pages: 64

Brand: Beny Sports Pages: 24

Brand: Gold's Gym Pages: 36

Pro 500 Anti-Gravity Treadmill

Brand: AlterG Pages: 48

Anti-Gravity Treadmill Via 400

Brand: AlterG Pages: 56

Brand: Life Fitness Pages: 83

Brand: Bowflex Pages: 66

Brand: Reebok Pages: 34

Brand: LifeGear Pages: 21

Brand: TTAP Pages: 13

Brand: NordicTrack Pages: 32

Brand: NordicTrack Pages: 34

Brand: Landice Pages: 32

Brand: Taurus Pages: 36

Brand: ProForm Pages: 30

4300r Treadmill

Brand: NordicTrack Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands