CIRCLE FITNESS Run 3.0i Owner'S Manual Download | Manualshive

Page: 6 / 52

background image

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

Grounding Instructions

Grounding Instructions

This treadmill must be grounded. If it should malfunction or break down, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Please make sure that the treadmill is connected to an outlet having the same configuration as the
plug. Do not use a ground plug adapter to adapt the power cord to a non-grounded outlet.

115V EURO PLUG 208-220V

NEMA 5-20 CEE 7/7 NEMA 6-15

The power requirements for the treadmill include a grounded, dedicated circuit, rated for one of the
following:
115 VAC 5%, 60HZ and 20 amps; 208/220 VAC, 60HZ, 15 amps or 230 VAC 5%, 50HZ and
15amps.

GROUNDING OUTLET

GROUNDING OUTLET

TREADMILL POWER CORD
SURGE PROTECTOR
GROUNDING PLUG

ADAPTOR

SCREW

SURGE PROTECTOR
GROUNDING PLUG

3 PRONG OUTLET

2 PRONG OUTLET

4

«
...
4
5
6
7
8
...
»

Summary of Contents for Run 3.0i





















































Reviews:

No comments

Related manuals for Run 3.0i

C2150 Treadmill

Brand: NordicTrack Pages: 34

Brand: CYBEX Pages: 72

Brand: Weslo Pages: 16

Brand: Spirit Pages: 32

Aquasizer AS100

Brand: Hot Tub Products Pages: 4

Brand: LIFESTYLER Pages: 12

Brand: PowerMax Pages: 17

Brand: Pro-Form Pages: 26

NordicTrack Commercial X14i

Brand: ICON Health & Fitness Pages: 40

Brand: LA Fitness Pages: 17

Brand: ICON Health & Fitness Pages: 40

Brand: ProForm Pages: 20

Brand: ProForm Pages: 26

600 S Treadmill

Brand: ProForm Pages: 26

6.0 GSX PFTL51105.3

Brand: ProForm Pages: 26

Brand: ProForm Pages: 30

Brand: Weslo Pages: 16

Brand: ProForm Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands