CIRCLE FITNESS Run 3.0i, Owner'S Manual

Page: 47 / 52

CARE & MAINTENANCE CARE & MAINTENANCE
CARE & MAINTENANCE CARE & MAINTENANCE
Always remove the key and unplug the power cord before cleaning, lubricating, or performing any
maintenance.
RUNNING BELT AND RUNNING DECK LUBRICATION
Regular maintenance is necessary for best performance and longer treadmill life. The maintenance
procedure will prevent premature wear of the running belt, running deck and drive motor system. It
is difficult to predict exactly when will need lubrication, we recommend the following time table as a
45
guide to lubricate:
USAGE PERIOD LUBRICATION
Light user Less than 3 hours / week Every 4 months
Medium user 3~5 hours / week Every 2 months
Heavy user More than 5 hours / week Every 1 months
Please contact your dealer for ordering lubricant.
HOW TO SPRAY SILICONE ON DECK
1). Find the silicone bottle. It put into hardware kit package when you purchase this treadmill, and
open the carton box.
2). Spray silicone on treadmill deck even, the spray area is like the drawing showing.
(
ATTENTION : You must stop the treadmill belt completely before spraying the silicone. Failure to
do so could cause injury such as cutting your hand on the edge of the belt and crushing your fingers
between the rear roller and the belt.) Do not put too much silicone on the deck. It can cause the
running belt to slip when in use if there is too much lubrication.
SPRAY AREA
Silicone bottle
CLEANING
Perspiration should be wiped from the console and treadmill surface after your workout. You should
wipe down this treadmill after each use with a water dampened, soft cloth. Be careful do not get
excessive moisture on the display panel, this might cause an electrical hazard or electronics to fail.
STORAGE
Store your treadmill in a clean and dry environment. Ensure the master power switch is off and is
unplugged from the electrical wall outlet.
MOVING
This treadmill has been designed and equipped with wheels for easy mobility.
Before moving, ensure the master power switch is in the off position and the power cord is
unplugged from the electrical outlet.