Document NO. B-7A-EM-English
PAGE
Page 14 of 14
Engineer Manual-Trouble Shooting
VERSION
A
3.
Engineering Mode
3.1.
Engineering Mode ONE: Factory Settings
3.1.1.Console no power condition, press START and UP simultaneously and start to
paddling, To leave you hand from keys till dot-matrix window show WELCOME.
3.1.2.LED will do the scan mode after dot-matrix window show WELCOME, then dot-matrix
will show『BM010 FACTORY SETTINGS PRESS ENTER』.
3.1.2.1.
Press ENTER to select model type:Dot-matrix window show EP-7000, press
UP or DOWN to change the model type to EP-5000 or B-7000.
3.1.2.2.
Press ENTER to set the unit:Dot-matrix window show『UNITS ENGLISH』,
press UP or DOWN to change to『UNITS METRIC』。UNITS ENGLISH:mile、LB.
UNITS METRIC:km/h、kg. Press ENTER back to idle mode.
3.2.
Engineering Mode TWO: Used Information Management
3.2.1.Console no power condition, press START and DOWN simultaneously and start to
paddling, To leave you hand from keys till dot-matrix window show WELCOME.
3.2.2.The dot-matrix window show software version information, TIME window show total
used time
00:00(m:s)
~
9999(h)
, DISTANCE window show total used distance
0.0
~
999.
Press ENTER back to idle mode.