27
4.1 DOWNLOAD VIA MOBILE COMPUTER
The 3G/GPRS Cradle allows you to upgrade firmware via the mobile computer. When
firmware upgrade is available, download the utility “8000Deploy3G.shx” to your mobile
computer.
Warning:
DO NOT upgrade firmware unless the version of firmware is newer than
that your cradle has. For information of the current firmware version,
check AT commands.
1)
Download the utility “8000Deploy3G.shx” to your mobile computer.
The mobile computer will display a selection menu.
2)
On your mobile computer, select
F/W Upgrade
.
3)
Seat the mobile computer in the cradle.
You may see this error message when the mobile computer is not properly seated in the
cradle. Please try again!
Warning:
Before completing the download, do not disconnect the power cord or
remove the mobile computer from the cradle!
Chapter 4
UPGRADING FIRMWARE
