CipherLab 9400CE, Reference Manual

Page: 28 / 111

18
9400CE Mobile Computer Reference Manual
Charging done On --- ---
Good Read On --- ---
Bluetooth enabled --- --- On
Note: The green LED is also used for "Good Read" while collecting data.
1.5.2 AUDIO
Speaker
The mobile computer is integrated with a mono speaker, a low power transducer type, used for
playing sounds applied to events in Windows and programs, as well as playing audio files such as
.WAV files. In addition, it can be programmed for status feedback.
Headset
A headset jack is provided, which is a 2.5 mm DIA stereo earphone jack with microphone input.
Bluetooth headset is also supported.
1.5.3 VIBRATOR
The mobile computer is integrated with a vibrator, which is software programmable for feedback.
This can be helpful when working in noisy environments.
1.6 DATA CAPTURE
1.6.1 BARCODE & RFID READER
A wide variety of scan engines is available for delivering flexibility to meet different requirements.
Depending on the scan engine integrated (check the "Active Device" setting in ReaderConfig), the
mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by
default. If you need to scan barcodes that are encoded in a different symbology, use the Reader
Configuration Utility to enable the symbology first.
Refer to Appendixes for details on scan engine settings.
Appendix I – Scan Engine Settings lists the symbologies and RFID tags supported.
Appendix II – CCD/Laser Scan Engine provides information on the reader settings as well as
symbology settings for the CCD or Laser scan engine.
Appendix III – 2D Scan Engine provides information on the reader settings as well as symbology
settings for the 2D scan engine.
Note: The mobile computer allows the co-existence of one integrated scan engine and the RFID
reader.