15
For deployment engineers, you can download the utility “8400DeployGPRS.shx” to your
mobile computer, and then use it to deploy a set of standard settings to the cradles, as
well as perform light functionality testing.
1)
Run one of the CipherLab download utilities on your desktop computer, for example,
“ProgLoad.exe”. Choose the correct interface, COM port, baud rate, file type, and
browse the file system to locate the utility “8400DeployGPRS.shx”.
Note: If you are using USB Virtual COM for the first time, you must install its driver from
the CD-ROM. Driver version 5.3 or later is required. Please remove older versions!
The Virtual COM port will not be assigned until the USB port is in use.
2)
Press [8]+[Power] on the mobile computer to turn it on and access the Program
Manager menu.
You may download the program directly to the active memory sector “AC”, or to an
empty sector and activate the program later. Choose the correct interface and baud
rate that match the settings on your desktop computer.
3)
Upon completion of the download process, you will have to activate the program if it
is downloaded to an empty sector.
4)
The utility “8400DeployGPRS.shx” will start itself in a few seconds.
5)
Go to
1. Settings > 2. Configure
to configure GPRS settings, such as PIN code,
name of access point, etc.
Note: You must input the correct PIN code even though authentication is disabled!
Chapter 3
USING 8400 TO CONFIGURE GPRS CRADLE
