EGS3 Hardware Interface Description
6.3 Packaging
110
EGS3_HD_v01.000a
Page 108 of 117
2009-08-12
Confidential / Released
6.3.2
Shipping Materials
EGS3 is distributed in tape and reel carriers. The tape and reel carriers used to distribute EGS3
are packed as described below, including the following required shipping materials:
•
Moisture barrier bag, including desiccant and humidity indicator card
•
Transportation bag
6.3.2.1
Moisture Barrier Bag
The tape reels are stored inside an MBB (=moisture barrier bag), together with a humidity indi-
cator card and desiccant pouches - see
. The bag is ESD protected and delimits mois-
ture transmission. It is vacuum-sealed and should be handled carefully to avoid puncturing or
tearing. The bag protects the EGS3 modules from moisture exposure. It should not be opened
until the devices are ready to be soldered onto the application.
Figure 48:
Moisture barrier bag (MBB) with imprint
The label shown in
summarizes requirements regarding moisture sensitivity, includ-
ing shelf life and baking requirements. It is attached to the outside of the moisture barrier bag.
