11
See what your CPR4 is seeing – on your PC or Android device
From a regular PC with Windows operating system (XP, Vista or Windows 7) or
an Android device - and a Bluetooth adapter, you may remotely supervise and
control up to four CPR4 units.
The Bluetooth adapter may be internal (built-in) or an external USB adapter.
An external USB adapter for Bluetooth Class 1 gives the longest range, up to
100 meters. Bluetooth Class 2, which is normally built into computers, gives a
useful range of 5 to 20 meters depending on the environment. The CPR4 have
Bluetooth Class 1 and a built-in antenna.
Installation steps CPRMon for Windows
There are some steps you have to walk through the first time you use the
Bluetooth interface on your computer, and when you connect to a CPR4 for
the first time.
We have one description for all operating systems so some terms and
procedures may be slightly different on your system.
1)
Make sure you have Bluetooth hardware installed, may be internal or
external adapter.
2)
Make sure you have Bluetooth radio enabled.
3)
In control panel, find Bluetooth or Devices
4)
Select “Add Bluetooth device”
5)
Power on the CPR4 and keep it within range
6)
The CPR4 should turn up in the search window
7)
Select the CPR4
8)
If asked for type of pin code select “key from documentation”
9)
Enter the pin code “0000” (four zeros)
10)
Note the Com-port number. Each connected CPR4 will have a Com-
port number.
11)
Set the Com-port number in the CPRMon program.
3.
USING THE SOFTWARE
Summary of Contents for CPR4
Page 1: ...CPR4 Handheld Radar User manual...
Page 16: ...www cinside eu...
