Important Information
Caution
The discharge of electrostatic energy can damage or destroy the print
head or electronic components used in this device. Do not touch the print
head or any exposed electronic components.
Never operate the printer in a location where near liquid or inflammable
substances. It might cause personal injury.
The print head and motor get hot during use. Never touch them until they
recover cool.
Always turn POWER OFF before: (1) connecting any cables (2)
performing any cleaning or maintenance operations.
Battery
Extending Battery Life
The battery storage temperature is 40
∘
F to 104
∘
F (4
∘
C to 40
∘
C).
Don’t store a fully charged battery pack at temperature above this range
for a long period.
Don’t disassemble or modify a rechargeable battery pack. Otherwise, it
will leak, overheat or crack.
Always use a Cino charger to charge. The use of any other kind of charger
may damage the battery pack.
Remove the battery pack from the printer if you will not use it for a long
time.
Battery Disposal
Don’t dispose the used battery packs in unsorted waste. Please recycle them
according to your local regulations.
Product Disposal
The Micro2 complies with Directive 2002/69/EC of the European Parliament
and of the Council of 27 January 2003 on Waste Electrical and Electronic
Equipment (WEEE). In order to avoid the dissemination of those substances
in our environment and to diminish the pressure on the natural resources, we
encourage you to use the appropriate take-back systems for product
disposal.
Agency Approvals and Regulatory Information
FCC part 15B, FCC part 15C
EN 55022, EN 55024, EN 301 489-1 & 489-17, EN 300328
CNS13438,
CNS14336
LP0002
IEC60950-1
TELEC STD-66
GB9254, GB4943
CB
SRRC
10