Cino FuzzyScan S680, User Manual

Page: 37 / 46

27
The scanner is unable to read barcodes./The scanning rate is poor.
Possible Causes:

The scanner has not been programmed to read the barcode’s symbology.

The barcode is physically damaged.

The distance of the scanner to the barcode is too far or the angle is too askew.

The scanner’s window is obstructed.
Possible Solutions:

Enable the applicable barcode symbology on your scanner.

The barcode may be too damaged, stained, distorted, poorly printed, or small to be readable.
Reflective surfaces may also impede scanning. Please obtain a replacement barcode if
possible.

Adjust your scanner’s distance or angle to the barcode.

Remove anything that may obstruct the scan window. Gently clean off any dust, grease, or
liquid with a soft cloth. Be careful not to scratch or damage the scan window.
Scanned data are incorrectly displayed on host device
Possible Causes:

The scanner’s host interface setting is not properly configured.

The scanner’s keyboard layout setting is not properly configured.
Possible Solutions:

Re-configure the scanner’s host interface settings.

Re-configure the scanner’s keyboard layout setting.