Cino FuzzyScan S680, User Manual

Page: 36 / 46

26
Common Issues and Solutions
Below are examples of common scanner issues, as well as their possible causes and solutions.
Unable to power on the scanner. / The LED lights will not turn on
Possible Causes:

The scanner has not been turned on or has not been plugged into the host unit.

The scanner is not receiving adequate power.
Possible Solutions:

Make sure your scanner’s cable is properly attached to both the scanner and the host unit.

Turn on your host device so that the scanner may receive power through its port.

Make sure the port used delivers sufficient power voltage.
The scanner reads barcodes, but data are not being transmitted to the host device
Possible Causes:

The scanner’s host interface settings is not properly configured.

The scanner’s cable is loose on one or both ends.
Possible Solutions:

Re-configure your scanner’s host interface settings.

Make sure your scanner’s cable is properly attached on both ends.