Cino CN-KA Instruction Manual Download Page 6

Water shortage

Capsule blocked

KA:  If the capsule gets stuck/blocked in the chamber because it is outdated or damaged, the 

        machine will send out the warning with the medium cup indicator blinking at 2 times/s 

       accompanied with a synchronized “beep”. Now you need to open the handle, change the 

       capsule and press any volume button to disengage the warning.

KA:  When there is a water shortage, the machine will signal a warning: the medium cup indicator 

        blinks at 2 times/s continuously and the machine beeps continuously at 2 times/s. 

        Now refill the water tank and press any volume key to disengage the warning.

KB:  When there is a water shortage, the machine will send out a warning: all indicators blink at 3Hz.

KB:  If there is something wrong with the capsule, coffee can not be brewed and the machine 

        will send out a warning: big cup indicator blinks at 2Hz.

KA:  When there is an NTC error, the machine can’t work and it will shut down both boiler and 

        pump. All the three volume buttons blink together at 2 times/s synchronized with “beep”. 

        Now you need to call for Service.

NTC warning

KB:  When there is an NTC error, the machine will shut down and send out a warning: volume 

         indicators blink at 1Hz.

KA:  If the pump works over 2 minutes continuously, there will be a warning:The big volume 

        button blinks at 3 times, pausing 3 seconds synchronized with “beep”. To disengage the 

        warning, simply stop the machine and rest it for 1 minutes before reuse.

Excessive pump work

9

10

Trouble shooting

Technical parameters

Indicator does 

not function

·check plug.
·check if voltage is the same as specified on rating label.

Water is not pumped

·check water tank.

Handle can not be fully

pressed down

·check if there is foreign matter or capsule stuck in chamber.

·call service center.

Coffee flow is

not stable

·check water tank and make sure it is placed in position.
·check capsule and make sure it is placed in position.

Water, not coffee,

is brewed

·change for a new capsule.

Keys do not function

·plug off and plug on again

Other problems

·call service center.

·make sure water tank is positioned correctly.

·check if the capsule is as designated.

·nozzle blocked, use needle to clean it and run a cup of 

    water before use.

·call service center

1.5 L

~ 3.5kg

15  bar  

206mm        

295mm

350mm

5         40

Please  search the user manual information at www.cino.cn

See the data plate on the base of the machine

Summary of Contents for CN-KA







Reviews: