Operating instructions
2.KB
1.Preparation before use
1. Brewing coffee
1
2
3
4
1
2
3
5
1. Plug in the power cable
2. Add water and place water tank in correct position.
3. Place the cup
4. Press Power Button
(CN-KA You will hear a“beep”when the machine starts preheating.
）
(CN-KB The Indicators of volume and temperature that you select will always be ON.
）
5.(CN-KA Press the volume button to run a cup of water
）
(CN-KB Press brew key to run a cup of water
）
5
6
30ml
50ml
70ml
100ml
120ml
150ml
200ml
Blue light: ambient
temperature
Green light
：
40-45
℃
Yellow light
：
70-75
℃
Orange light
：
80-85
℃
Red light
：
90-95
℃
Volume selector
Temperature selector
Machine heating up: brewing indicators will blink at 1Hz, power indicators will
always be on, one of volume indicators will always be on, preheating time 45s.
After heating up, the machine goes into standby mode.
Stanby mode : indicators of brewing and volume will always be on.
If you open the handle in the Pre-heat mode, the temperature can’t be selected.
When WiFi indicator is ON, WiFi connection is successful; When WiFi
indicator blinks, WiFi connection is not successful. To erase WiFi
connection record: turn volume switch to 7 ( max volume ), turn
temperature switch at red, open the handle, press brewing button twice,
then power off and restart the machine.
WiFi instructions (Option)
Do not add hot water in water tank, Hot water may crack the tank, or cause electric shock.
Please notice the maximum and minimum water level.
