32
33
Assembly Instructions
Cinetto
B-moved - Wave Sensor.
2. Reset
To reset a channel, press and hold the corresponding button for 10 seconds. The LED will start to fl ash and
then remain steady for two seconds. Once it stops fl ashing, the reset procedure is completed and it will be
possible to pair again to the channel up to a maximum of 10 sensors.
Touch the sensor you want to pair, this will be immediately recognised, causing the LED to fl ash quickly
twice before turning off. At this point the procedure is completed and the devices are correctly paired.
• Up to 10 different sensors can be paired with each channel.
• The receiver remains in the “pairing” phase for 30 seconds. If no sensor is touched during this
time, the procedure is blocked.
•
If you try to pair a sensor already paired to the channel, the LED will fl ash quickly twice and
then block the procedure.
• If nothing happens, this means that either there is a system malfunction or the maximum
number of sensors that can be paired with the channel has been reached. Try resetting the
channel (see point 2) and repeat the pairing.
