1 | Setup up Slide
Step 2. Remove end caps from rails (Figure 1)
Step 3. Remove outrigger leg from rails (Figure 2)
Step 4. Attach additional rails, screw together all the way
Step 5. Move rail brace to the center where the rails connect (Figure 3)
Step 6. Replace outrigger leg and end caps
Slider Assembly
(The slider comes partially assembled)
Step 1. First take your slider and un-fold the outrigger legs by loosening the knobs. Position the legs so
your slider is standing. For ideal balance, you don’t want legs too narrow or too spread apart
Be sure to push outrigger legs all the way on, this is important for putting on the belt
3.
See it in video here:
https://vimeo.com/90878151
