Figure 31.
Step 7. Put ballhead with clamp on tripod. Slide the long end of the L-Bracket supporting the
controller into ballhead clamp and securly tighten clamp (Figure 32)
3 | Setting up Tilt cont.
12.
When panning or tilting,
balancing is a critical procedure
in making sure that Axis360
works correctly. Balancing simply
requires that the camera’s center
of gravity is located as close as
possible to the axis of rotation.
Position the L -bracket so that
the camer’s center of gravity is
located near the axis of rotation.
Figure 32.
Finding a camera’s center of gravity must be acquired empirically (the center of the lens may
not necessarily be the center of gravity
