2 | Cineak - Luxury Seating
Fortuny incliner - installation & operating manual - 10/2009
1
Unpacking
1.1
Opening boxes
Products are packed in double carton boxes to provide extra
protection. Please carefully remove top box.
1.2
Unloading
Chairs are HEAVY - lift from both ends, requires at least 2
people to lift with caution.
Before unloading make sure you note which parts you take out
of the box. Reference numbers are located on the cover of the
box and match numbers on seating parts on next page (refer to
“1.3 Product ID references”).
- Lift chair out of the box (do not lift by footrest at front - do-
ing so can damage the mechanism - lift by frame or bottom of
armrest), keep bubble wrap around the chair until installation.
Make sure you don’t scratch the leather with any sharp items or
clothing (zipper/snaps/buttons).
- Look for power supply in box before discarding box/shipping
materials.
IMPORTANT: While unpacking chairs, please inspect all chairs/
parts/mechanisms for any possible damage that may have oc-
curred during shipping (seat, frame, wood). If damages are
noted please contact CINEAK immediately before completion of
install. Failure to do so may result in exclusion of warranty/any
and all claims.
1.3
Instalation reference
Each box will identify the contents included - with numbers
listed on the outside of the box
Each part of the row (armrest or seating part) has been assigned
a number. When unpacking parts please mark them with the
corresponding number to avoid confusion later. Each box will
have a label, identifying the part numbers included in the box.
Match the numbers indicated on the box with the numbers
listed on the seating parts in the drawing. This will allow for
proper installation
sample:
Box1:
1
Box2:
2
1 2 3 4
Box3:
3
Box4:
4
Box5:
5
Box6:
6
Box7:
7
5 6 7
TOOLS YOU WILL NEED:
(1) POWER SCREW DRIVER
- to secure backrest to seat frame
TOOLS YOU MAY NEED:
(1) CHANNEL LOCK Pliers
- for customizing the amount of recline/
incline of backrest.