MAINTENANCE.
Servicing is recommended at least once per season, according to
usage.
SERVICING AND MAINTENANCE OF THIS APPLIANCE MUST NOT BE
CARRIED OUT BY THE OWNER. ALWAYS USE A REGISTERED
GAS-SAFE ENGINEER, OR CONTACT ‘CINDERS’ FOR ADVICE.
A current list of qualified engineers can be found on the CINDERS
website, www.cindersbarbecues.co.uk
SPARES and ACCESSORIES
Images for easy identification and ordering of Spares and Accessories are
also available on our website, www.cindersbarbecues.co.uk
TROUBLE SHOOTING
In order of possibility;
1) The burner lights but goes out when the control knob set at FULL is
released. The thermocouple probe has either failed or the flames are not
reaching it, because it has been replaced with a short probe thermocouple..
This is a job for a competent person with a replacement probe from us.
2) A rushing noise with the smell of gas could be that the regulator has
been changed for a High Pressure type, or there is a major leak. In either
case TURN OFF at the gas cylinder and refer to a qualified gas engineer.
A list of qualified gas engineers can be found on our website.
3) Uneven heat which is also associated with low power can usually be
traced to a partially blocked injector or a burner which has not been cleaned
and maintained annually. These are jobs for a qualified gas engineer, and a
list can be found on our website.
4) Flare-ups are due to too much fat falling into the barbecue, never by too
high a gas heat.
Check out the cooking demonstrations on our website and experiment with
different food types before committing to an event. ‘Getting the best out of
your Barbecue’ is also available on our website, which
provides useful tips for commercial barbecuing.
WARRANTY
Cinders Barbecues offers a one year parts and labour warranty and a
further year parts-only warranty with proof of annual servicing by a quali-
fied gas engineer. Warranty excludes thermocouple probes, use other than
intended, modifications or misuse.
Page 8, Issue 1