Cincoze GEB-3301-R10 User Manual Download Page 45

Page: 45 / 183

GP-3000 Series | User Manual

Place the thermal pad on the CPU heat spreader. Press down the socket lever to lock the CPU.

Note: Before putting on the heatsink (in the next step), please make sure the transparent

protective film on the Thermal Pad has been removed!

Aim at the four mounting holes and put on the CPU heat sink according to the picture below.

Fasten two screws at

upper left and lower right corners. Screws at upper right and lower left

corners need not to fasten here, they will be fastened in the step 3 of chapter 3.8.

Place the thermal pad on the CPU heat sink.

Note: Before assembling the

system’s chassis cover, please make sure the transparent

protective film on the Thermal Pad has been removed!

Thermal pad

Summary of Contents for GEB-3301-R10
























































































































































































Search results

Summary of Contents for GEB-3301-R10

Reviews:

Related manuals for GEB-3301-R10

Brands by name

Popular brands

Cincoze GEB-3301-R10, User Manual

Search results

Summary of Contents for GEB-3301-R10

Reviews:

Related manuals for GEB-3301-R10

Brands by name

Popular brands