Cincoze CV-108R-R10/P1001 User Manual Download Page 91

Page: 91 / 111

CV-100/P1000 Series

Industrial Panel PC

| User’s Manual

Chapter 4: BIOS Setup

■

Intel IGD Configuration

This section provides onboard graphics-related configuration options.



GOP Driver

This item will allow users to enable or disable GOP Driver.



Integrated Graphics Device

This item will allow users to enable or disable Integrated Graphics Device.



IGD Turbo Enable

This item will allow users to enable or disable IGD Turbo.



Primary Display

"Auto or IGFX or PEG or PCIE or SG” optimal to Primary Display.



GFX Boost

This item will allow users to enable or disable GFX Boost.



Aperture Size

Aperture size optimal between 128MB, 256MB, or 512MB.



DOP CG

This item will allow users to enable or disable DOP CG.



GTT Size

GTT size optimal between 1MB or 2MB.



IGD Thermal

This item will allow users to enable or disable IGD Thermal.

Summary of Contents for CV-108R-R10/P1001
















































































































Search results

Summary of Contents for CV-108R-R10/P1001

Reviews:

Brands by name

Popular brands

Cincoze CV-108R-R10/P1001, User Manual

Search results

Summary of Contents for CV-108R-R10/P1001

Reviews:

Brands by name

Popular brands