Cincoze CV-100/P2000 Series User Manual Download Page 106

Page: 106 / 129

100/

P2000 Series | User Manual

106

4.3.9

SATA Configuration

■

Serial Controller(s) [Enabled]

Allows you to enable or disable Serial ATA controller.

■

SATA Mode [AHCI]

This item allows users to choose [AHCI] or [RAID] mode.

■

Software Feature Mask Configuration

RAID option ROM (OROM) / Intel® Rapid Storage Technology (RST) driver will refer to the
software feature configuration to enable or disable the storage features.

❑

RAID0 [Enabled]

Enables or disables RAID0 function.

❑

RAID1 [Enabled]

Enables or disables RAID1 function.

❑

Intel Rapid Recovery Technology [Enabled]

Enables or disables Intel® Rapid Recovery Technology function.

❑

OROM UI and BANNER [Enabled]

Enables or disables option ROM UI banner.

❑

OROM UI Normal Delay [2 Seconds]

Changes the delay time for option ROM.

❑

HDD Unlock [Enabled]

Enables or disables HDD unlock.

❑

LED Locate [Enabled]

Enables or disables LED Locate.

❑

Smart Response Technology [[Enabled]

Enables or disables Smart Response Technology.

Summary of Contents for CV-100/P2000 Series


































































































































Search results

Summary of Contents for CV-100/P2000 Series

Reviews:

Related manuals for CV-100/P2000 Series

Brands by name

Popular brands

Cincoze CV-100/P2000 Series, User Manual

Search results

Summary of Contents for CV-100/P2000 Series

Reviews:

Related manuals for CV-100/P2000 Series

Brands by name

Popular brands