Operation Manual
NORM-O-TEMP, Model 111W
Page 12 of 26
1-3.
Physical Description of the NORM-O-TEMP
®
System
See Section 2 for specifications and certifications of the NORM-O-TEMP
®
system.
1-3.1.
External Features and Descriptions – Front View
The external features in Figure 1 of the NORM-O-TEMP
®
unit are described as
follows:
A.
The control panel is composed of pressure sensitive touch switches and an LED display.
An expanded description of the membrane control panel is presented in the
Operation/Technical Manual.
B.
The operating instructions printed below the control panel describe the necessary steps
to operate the unit.
C.
The power switch is a bevel rocker switch labeled “I” (on) at the top and “O” (off) at the
bottom.
D.
The four rubber feet help the unit to mount on the I.V. stand (Catalog #118), the low
profile stand (Catalog #119) or allow the unit to sit on a flat surface.
E.
The water fill opening is where the operator pours distilled water to fill the reservoir.
F.
The red, Power Fail LED is the visual indicator when power is disconnected with the
switch still in its on position or when the independent mechanical (High Limit) safety is
activated.
Figure 1. NORM-O-TEMP
®
unit, Front View
Summary of Contents for NORM-O-TEMP
Page 27: ......
