Note:
Not always that the computer can detect web cam function due to the computer
configuration or the system differences. If the product cannot enter into web cam mode, but into
the movable disk mode occasionally, please remove this unit, start up this unit and re-connect it
to the computer. If you just use the computer web cam function of this machine on your computer
for the first time, please install the web cam driver attached to the floppy disk or provided by the
distributor; to prevent this product from being damaged, please connect one end of data line to
the computer before connecting it to the computer, connect the other end of data line to the
computer. Temporarily, the computer web cam function of this unit can only support WINDOWS
operating system.
7. Movable disk
This unit may be used as a movable disk, with the method of usage shown as below.
a.
Turn off the device at first, connect the device to the computer with USB data cable, the
movable disk icon will pop up in the computer.
b.
The directory for saving video file is *Disk\ _REC\100MEDIA.
c.
To dismantle the device, please click the movable device management icon at the right lower
corner to remove this movable memory device and after the computer has confirmed to
disconnect the hardware safety, disconnect the device and computer.
Note:
The time for computer to identify the movable disk is relative to the computer configuration,
operating system and memory capacity, please wait patiently during this course and never
operate the unit, which may affect the hardware identification. If the movable disk cannot be
recognized for a long time, please try to re-connect; if it is not recognized yet, please confirm if
your operating system, motherboard driver, USB port and connection line can work normally.