PRINTER
INSTALLATION
The following will guide you through the instal-
lation of your K300 Optima Printer.
CAUTION: Limit AC power supplied to the
K300 Optima to 110 ~ 230 volts, 60 ~ 50
Hertz, for an associated
800
~
400
milliamps.
Limit excess current draw to 16 amps or less, us-
ing an associated circuit breaker or other such
device. Never operate the printer in a location
where operator, computer, or printer can get
wet. Personal injury could result. The electrical
security of the printer is based on the reliability
of the mains power source.
CAUTION: Intermittent or unpredictable oper-
ation may occur from unsecured connectors. If
damaged, the power cable must be replaced by
an exact equivalent.
4
K300 Optima Rev.07.99
1.
Place the printer in a location that allows easy access
to all sides. The printer should never be operated while
resting on its side or upside down.
2.
Place the printer’s power switch in the OFF (0)
position.
3.
Insert the power cable into the printer power
socket and attach to grounded electrical socket of the
proper voltage and type.
4.
Attach interface cable to printer and computer and
then secure.
5.
Switch power on.
Summary of Contents for K300 Optima
