OPERATION
8
2 • 3
Loading Lamination Patch
The K 500 Optima Printer requires approved patches.
Clear patches, hologram patches or Overlay varnishes are specifically designed for
your K 500 Optima Printer. For optimum performance and printer life (Laminator),
always use approved patches.
1 •
Remove patch from packaging.
2 •
With printer power ON and printer Ready status,
open cover.
3 •
Press down on the Laminator Unlock Lever to
open the laminator bracket. The laminator bracket
will pop open.
4 •
Load patch onto the supply spindle “1”
(under laminator bracket) and align the notch of the
empty core with the spindle screw (with tape
attached) onto the take-up spindle “2” .
Make sure the patch comes off the top of the supply
spindle and feeds to the top of the take-up spindle.
5 •
Push down on the Laminator Lock Lever until an
audible “click” signals the locked-down position.
6 •
Close Cover
.Please note that the ribbon automatically
synchronises whenever the laminator head
lock down occurs.
2
1