CIGWELD weldskill 100, Operating Manual, Page: 15 / 60

weldskill 100, 135, 150 MiG
2-3
Introduction
2.05 Description
Weldskill 100 Mig
The WeldSkill 100 Mig is a semi-automatic Flux Cored
Arc Welder (FCAW) with an integrated wire feed unit.
The Power Source is designed to meet the broad oper-
ating needs of the home weekend welder. It complies
to Australian Standard AS 60974.6 The WeldSkill 100
Mig gives excellent performance on mild steel using
Cigweld gasless flux cored wire.
The WeldSkill 100 Mig is supplied as a complete
package ready to weld including a spool of 0.8mm
Cigweld gasless mild steel wire. The following instruc-
tions detail how to correctly set up the machine and
provide important safety information. Please read
these instructions thoroughly before use in order to
obtain the best results from your WeldSkill 100 Mig
Welder.
WeldSkill 135 Mig
The WeldSkill 135 Mig is a semi-automatic Gas
Metal Arc Welder (GMAW-commonly MIG) with an
integrated wire feed unit. The Power Source is de-
signed to meet the broad operating needs of the home
weekend welder. It complies to Australian Standard
AS 60974.6
The WeldSkill 135 Mig gives excellent performance
on mild steel, stainless steel, and aluminium wires
with Argon based shielding gases. The WeldSkill
135 Mig is supplied ready to weld including a spool
of 0.8mm Cigweld gasless mild steel wire (for use
with gas MIG welding — the gas regulator/flowmeter,
gas MIG wire and gas cylinder are not included). The
following instructions detail how to correctly set up
the machine and give guidelines on gaining the best
production efficiency from the Power Source. Please
read these instructions thoroughly before using your
WeldSkill 135 Mig Welder.
WeldSkill 150 Mig
The WeldSkill 150 Mig is a semi-automatic Gas
Metal Arc Welder (GMAW-commonly MIG) with an
integrated wire feed unit. The Power Source is de-
signed to meet the broad operating needs of the home
weekend welder. It complies to Australian Standard
AS 60974.6
The WeldSkill 150 Mig gives excellent performance
on mild steel, stainless steel and aluminium wires
with Argon based shielding gases. The WeldSkill
150 Mig is supplied ready to weld including a spool
of 0.8mm Cigweld gasless mild steel wire. (for use
with gas MIG welding — the gas regulator/flowmeter,
gas MIG wire and gas cylinder are not included). The
following instructions detail how to correctly set up
the machine and give guidelines on gaining the best
production efficiency from the Power Source. Please
read these instructions thoroughly before using your
WeldSkill 150 Mig welder.
2.06 User Responsibility
This equipment will perform as per the information
contained herein when installed, operated, maintained
and repaired in accordance with the instructions
provided. This equipment must be checked periodically.
Defective equipment (including welding leads) should
not be used. Parts that are broken, missing, plainly
worn, distorted or contaminated, should be replaced
immediately. Should such repairs or replacements
become necessary, it is recommended that such
repairs be carried out by appropriately qualified
persons approved by CIGWELD. Advice in this regard
can be obtained by contacting accredited CIGWELD
Distributor.
This equipment or any of its parts should not be altered
from standard specification without prior written
approval of CIGWELD. The user of this equipment
shall have the sole responsibility for any malfunction
which results from improper use or unauthorised
modification from standard specification, faulty
maintenance, damage or improper repair by anyone
other than appropriately qualified persons approved
by CIGWELD.
2.07 Transporting Methods
This unit is equipped with a handle for carrying
purposes.
!
WARNING
ELECTRIC SHOCK can kill. DO NOT TOUCH
live electrical parts. Disconnect input
power conductors from de-energized
supply line before moving the welding
power source.
!
WARNING
FALLING EQUIPMENT can cause serious
personal injury and equipment damage.
Lift unit with handle on top of case.
Use handcart or similar device of adequate capacity.
If using a fork lift vehicle, place and secure unit on a
proper skid before transporting.