ONT G-25E Hardware Installation Manual
3.4
Connecting Telephone (POTS) Service
1.
Locate the premises’ telephone wire pair.
2.
If the wire pair is not terminated, follow local practices to attach an RJ-11 connector.
3.
Plug the wire pair with RJ-11 connector into one of the ONT RJ-11 phone jacks.
4.
Repeat step 2-3 as needed to connect additional phone lines.
Pin Signal
Pin Signal
1 Unused
3 Tip
2 Ring
4 Unused
Table 6 POTS RJ-11 connector wiring pattern
DANGER: Please make sure the wire pair connected is from/to the telephone. Using the
wire pair from/to the PSTN network falsely may cause damage to user and the device.
3.5
Connecting Ethernet Service
1.
Locate the premises’ Ethernet LAN cable.
2.
If the cable is not terminated, follow local practices to attach an RJ-45 connector. Table
shows Ethernet RJ-45 connector wiring information.
3.
Plug the Ethernet cable into the ONT RJ-45 Ethernet port.
4.
Repeat step 2-3 as needed to connect additional Ethernet cables.
Pin Color
Signal
Pin Color
Signal
1 Orange/White
Tx
+
5 Blue/White Unused
2
Orange
Tx —
6
Green
Rx —
3 Green/White
Rx
+
7 Brown/White
Unused
4 Blue
Unused
8 Brown
Unused
Table 7 Ethernet RJ-45 connector wiring pattern
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
8
