Introduction:
Before installation please remove the Facia Trim Plate from around the front edge of the unit. This can be
refitted once the installation is finished and any decorating is completed.
The compact depth of the AVID3 unit will allow installation into standard UK 2-gang EO boxes, with a
minimum of 40mm depth.
These may be galvanised metal for installation in solid construction walls, plastic drylining (with lugs) or
may be installed into surface mounting Dado-type trunking systems using the appropriate fixings.
Front Panel Controls and Connectivity:
3 illuminated buttons allow basic control of the AVID3, the bottom button ( ) controls the ON/OFF
function, the up/down buttons ( ) control Volume Up and Volume Down.
Selection of which output is being broadcast is made by short pressing the ON/OFF Switch, S1/S2 is
displayed in the display to show which input is in use.
Two types of input are provided via the front panel; a Stereo 3.5mm Jack and Stereo Phono Inputs; and a
hard wired input is provided to the rear of the AVID3.
The Hi/Lo switch adjusts the input sensitivity from 1v (Line Level) to 200mv (average Headphone output
level), allowing the interface of generic MP3, CD and media players without loss of system volume level.
A clear LCD Display shows the desired volume level between 0 (no output) to 20 (maximum output) as well
as showing which input is in use (S1/S2).
Fascia
Trim
Plate
Hi/Lo Line
Level
Sensitivity
Switch
IR
Receiver
Window
Audio Level
Display
Volume
Level
Up
Volume
Level
Down
ON/OFF
Switch/
Input Select
3.5mm
Jack
Input
