CL906 - 900MHz Cordless
10
INSTALLING THE CL906
e. Take the remaining end and plug it into the wall
phone jack.
T
O
MOUNT
ON
A
WALL
a. Remove the
mounting
wedge.
b. Position the
wedge so that
the arrow on
the wedge is
pointing up.
c. Place the
wedge over
the lower
portion of the
bottom of the
base so the
arrow points
toward the center of the phone.
d. Install the wedge by aligning it over the holes
and pressing down and in the opposite
direction of the arrow until it snaps into
place.
e. Plug the short phone cord into the phone jack
marked
TEL LINE.
f. Thread the phone cord through the open
channel in the base.
g. Plug the other end of the phone cord into the
wall phone jack.
h. Use the gap on the underside of the base to
gather any excess cord.
i. Hang the base over the installation hooks (wall
plate not supplied).
R
EMOVING
THE
M
OUNTING
W
EDGE
a. Remove the mounting wedge from the bottom
of the base by placing your thumb at the top
of the arrow on the mounting wedge and
pressing down in the direction of the arrow.
Wall Mounting
Short Telephone Cord
CL906.book Page 10 Friday, January 18, 2002 2:25 PM
