CID X-TREME XBC60LF, Owner'S Manual

Page: 17 / 52

X-treme Brush Cutter
January 2021
17
3.1 Unpacking Your Brush Cutter
1. Ensure the hydraulic lines are clear from the front side of the brush
cutter’s attachment plate and that the levers on the skid steer quick attach
mechanism are in the unlocked position.
2. Drive the skid steer to the attachment plate and hook the top edge of
the skid steer quick attach mechanism under the lip of the brush cutter’s
attachment plate (see figure 3.2a below).
3. Slowly tilt the skid steer quick attach mechanism upward until the brush
cutter attachment plate is flat against the skid steer quick attach mechanism
(see figure 3.2a below).
Consult your skid steer operator’s manual for specific instructions on how to connect
your brush cutter to your skid steer loader.
General Attachment Method
Figure 3.2a Quick Attach Mechanism Locked to Attachment
Your attachment arrives from the factory strapped to a wood pallet, and requires no
final assembly. Use a pair of tin snips to remove the steel strapping.
Shipping straps are under great tension, and could lash out uncontrollably
when cut causing injuries to your body. Keep bystanders away and wear
safety glasses and gloves while removing the straps.
3.2 How To Connect Brush Cutter Attachment