CID SBC 14-20 GPM, Owner'S Manual

Page: 19 / 58

Swing Boom Cutter
August 2021
19
5. Connect the attachment hydraulic hoses and the case drain hose (SBCNS
model only) to the auxiliary supply couplers located on your skid steer loader lift
arm.
DO NOT operate this machine if you can see the cutter blade while seated in the
operator’s seat. If you can see the cutter blade, the back of the cutter is raised TOO
HIGH. Lower the cutter deck to avoid from being struck by flying debris.
3.3 Connecting Brush Cutter Cont.
Check that the hydraulic hoses are locked into the skid steer couplers
before starting the cutter.
To keep contaminants from entering the hydraulic system; wipe off any
dirt or dust from the male or female hydraulic flat face couplers with a
clean rag before attaching hoses.
3.4 Connecting Electrical Harness
Connect the electrical attachment harness from the swing boom cutter to the
electrical bulkhead connector mounted on the skid steer loader arm. A universal, 7,
8, or 14 pin
pigtail harness adapter is available to make this connection. See Electrical
Drawings, on page 47 for more information.