Cibo Finimaster, Manual

Page: 39 / 76

Manual FinimasterII
UK
39
Use of the Finimaster II
Introduction
• Before use, check the machine for defects (loose disc, damaged cable, etc.).
• Make sure that the voltage on the type plate corresponds to the voltage in the mains.
A 16 A safety fuse is used with voltage of 230 V.
• Only use the tools supplied by us!
Make sure that the start button is set to “0” when inserting the plug.
Choice of speed
The speed can be changed on the side where the cable enters the machine. Continuously vari-
able regulation ensures a speed of:
Note: For safety reasons, remove the plug from the power socket whenever
changing a tool!
Never use sanding disks or other accessories that are not suitable for the
speeds indicated.
Step Speed
1 2200
2 2900*
3 3800
4 4700
5 5600**
6 6500
It is recommended to make use of step 2 or step 3 for sanding with Tex wheels.