Indicates the state of the time schedule
Icon
Time schedule state
No validated time schedule
At least one time schedule is validated and active
Flashing if override currently requested by the Th-Tune
At least one time schedule is validated but not active
Indicates a "Cooling" request
Indicates a "Heating" request
Indicates the operation of the fan(s)
Indicates operation in terms of air quality
2.3.2 - Menus
The user interface is organised according to the menus below (certain menus are only accessible when the access level is 2 or 3
(see 4.18) and when the option is present on the machine):
1 / Machine status
2 / Setpoints
3 / Fault
4 / Fault memory
5 / Scheduling
5.1 / Weekly
5.2 / Annually
6 / Access levels
7 / Machine parameters (P01 to P99)
8 / Setting parameters (P100 to P299)
9 / Read parameters (P300 to P549)
10 / Versions (P550 to P599)
11 / Fault level (P600 to P699)
12 / Communication
12.1 / BMS1 (P700 to P709)
12.2 / BMS2 (P710 to P719)
12.3 / pLAN (P720 to P729)
13 / Calibration (P800 to P849)
14 / Direction of the inputs/outputs (P850 to P899)
17 / Intake FMA EC motor
17.0 / FMA settings (P1200 to P1219)
17.1 / Intake FMA1 (P1220 to P1239)
19 / Exhaust FMA EC motor
19.0 / FMA settings (P2200 to P2219)
19.1 / Exhaust GMV1 (P2220 to P2239)
20 / Energy meter
20.1 / Main box (P3000 to P3049)
21 / Test mode (P3500 to P3599)
22 / Measured values
2.3.3 - Keys
The 6 keys on the interface are used to change the parameters, acknowledge faults, and switch the unit on or off. The operation
of these keys is described below.
2 - THE CONTROL PLC
FLOWAY ACCESS
EN-8
